Stainless Steel Pressure Filtration System may be used for pilot scale productions where filtration of about 20-150 litres of liquid may be required at a time. For smaller batches of about 20 litres, a 142 mm dia plate is used & for little larger batches, a 293mm dia plate may be used.

These systems go especially well in wines and beverages where small batches are carried out. They can also be used in R&D work.

Features & Benefits:
Very good filtration systems for pilot scale production or R&D work.
Swing bolts making it easy to open or tighten the lid.
Easy change of membrane filter

Operations:

Applications

Pressure Filtration system consist of·
142mm / 293mm Membrane filter holder-
   Lower part of system·
4.5liter/20.5 lit filtration jar-Middle part of the system·
Air pressure Filtration device-Upper par of the system

Process water
Process fluids
Wines & Beverages
Pharmaceuticals
Chemical inds

In the lower part, filter paper of designed porosity is placed & secured by tightening the nut bolts. The tank is filled with wine or any other fluid to be filtered. The tank is closed by upper lid through the nut bolts .Upper lid has 3 opening viz.

1 For pressure gauge or venting.
2 For filling the jar.
3 To apply air pressure

The outlet beneath the filter holder is used for filtered fluid to be directly into the bottle or in any other container as desired. This part comes with SS Ball Valve for easy opening & closure of the outlet desired.

About 4 liters /20 lit of sterile filtered wine/any fluid can be obtained at a time. Depending upon the pre filtration and the clarity of the unfiltered wine, 4-5 batches can be carried out with the same nylon 66 membrane filter paper or up to 20 liters sterile wine can be obtained.