47 Mm Pressure Filter Holder

Stainless steel 47 mm Filter holder is designed for ultra cleaning or sterilizing of gases or liquids under high or low pressure .The liquid is filtered through a 47mm disc filter of appropriate pore size by passing it through pressure pump. Gas can be directly passed through inlet. The holders can be autoclaved with the membrane installed. A prefilter placed upstream of the membrane filter will prevent premature clogging when processing thick liquids.
Filter holder consists of: 

1) Holder Base. 
2) Filter support screen. 
3) Filter sealing Silicon O-ring.
4) Top Cap.
5) Locking ring with 2 arms.

Features & Benefits

Female threaded locking nuts designed to allow filter changes without removing holder from the systems.
Stainless screen support filter in both direction of flow thus preventing filter damage if reverse flow or pressure surges occur.
Unit may be operated up to 100 Kg/cm2
Silicon O-Ring compatible with many aggressive liquids & gases.
Top cap specially designed at 45˚ angle along the edge so that silicon ‘O’ ring is held tightly below to enable leak-free filtration.
 

 Specifications

 Applications

47 mm Holder can be used for in line microbiological sampling.
Can be installed for point of use filtration on filling machines
Sterilizing or ultracleaning of liquids or gases under high / 
   low pressure.